What To Do: If You Want To Boost The Brightness Of The LED On A Sony Xperia Z1,Z1 Compact and Xperia Z2

Boost The Brightness Of The LED On A Sony Xperia Z1,Z1 Compact and Xperia Z2

Mobile phones give us the option of using the camera flash as a flashlight.  With Sony Devices, there is a mod that can enhance the brightness level to make your mobile device a better flashlight by increasing the brightness of the LED light.

XDA member olokos devised the mod and in this guide, we’re going to show you how you can install and use it.  All you need is a Sony Xperia Z1, Z1 Compact or Xperia Z2 that has a custom recovery installed and is rooted.

NOTE: Leaving your LED on for a considerable amount of time can damage the LED. Be careful how you use it.

Download:

Xperia Torch Mod: Link

Note: The methods needed to flash custom recoveries, roms and to root your phone can result in bricking your device. Rooting your device will also void the warranty and it will no longer be eligible for free device services from manufacturers or warranty providers. Be responsible and keep these in mind before you decide to proceed on your own responsibility. In case a mishap occurs, we or the device manufacturers should never be held responsible.

How To Install Brightness MOD:

  • Copy LED Mod file you downloaded onto your device’s SD card.
  • Turn your phone off and open it on Bootloader/Fastboot mode by pressing and holding down the volume down and power buttons until some text appears on screen.
  • In bootloader mode and choose your Recovery.  For the next few steps, follow the one for the custom recovery you have installed on your device.

CWM/PhilZ Touch Recovery Users.

  1. Go to ‘Install zip from sd card’
  2. Another windows should open in front of you.
  3. In the options presented go to ‘choose zip from sd card’
  4. Select Revert to stock Z1 torch.zip file and confirm installation on the next screen.
  5. When Installation is Over, Select +++++Go Back+++++
  6. Select Reboot Now

TWRP Users.

  1. Go to the Main Menu
  2. Tap Install Button.
  3. Locate  Revert to stock Z1 torch.zip, Swipe Slider to install.
  4. When installation is finished, you will be promoted to Reboot System Now
  5. Select Reboot Now

Have you boosted the brightness of your LED.

Share your experience in the comments box below.

JR

About The Author

Reply

error: Content is protected !!