What To Do: If You Get The Message “Currently Unable To Send Your Message” On An Android Phone

“Currently Unable To Send Your Message”

If you are an Android device user, chances are you’ve occasionally been faced with the message, “Currently unable to send your message it will be sent when the service becomes available”, when you’ve tried to send and SMS or MMS. In this guide, we’re going to show you two ways that you can fix this problem.

Method 1:

  1. Go to Settings.
  2. From Settings, go to Mobile Networks.
  3. In then Mobile Network menu, press the home and power buttons until your device turns off.
  4. Remove your battery.
  5. Press the home and power buttons 10 times.
  6. After the tenth press, hold both buttons for 2 or 3 minutes.
  7. Put the battery back in, but don’t attach your back cover yet.
  8. Turn your device back on.
  9. When your device boots up, remove and insert the sim card 3 times.
  10. Restart device.

The issue of “currently unable to send your message it will be sent when the service becomes available ” should be gone for good, if not, try this other method.

Method 2:

  1. Open device dialer.
  2. Dial  *#*#4636#*#* .
  3. You should now be in service mode.
  4. Run Ping test.
  5. Turn off radio/turn on radio.
  6. Restart device.

Have you solved the issue of currently unable to send message on your device?

Share your experience in the comments box below.

JR

[embedyt] https://www.youtube.com/watch?v=1M5O2JW_x1k[/embedyt]

About The Author

14 Comments

  1. Jaylynn Russell October 16, 2016 Reply
  2. Jeff October 9, 2018 Reply
    • Android1Pro Team October 9, 2018 Reply
      • Jones July 19, 2019 Reply
  3. Thaluka June 20, 2019 Reply
  4. Olof Eriksson January 8, 2020 Reply
    • Android1Pro Team January 8, 2020 Reply
  5. Dan January 28, 2020 Reply
  6. Gail January 28, 2020 Reply
  7. Karen March 16, 2020 Reply
  8. Scott B March 31, 2020 Reply
    • Android1Pro Team April 10, 2020 Reply
  9. Boris April 19, 2020 Reply
  10. Matedgen November 15, 2020 Reply

Reply

error: Content is protected !!